# Scheduling Costs

Source: https://docs.astalty.com.au/guide/scheduling/scheduling-costs

> See estimated wage costs and revenue for your scheduled shifts, broken down by employee, Participant, and region.

Scheduling add-on - This feature requires the Scheduling add-on, which is available on Astalty Premium. See How to enable Scheduling.

Scheduling Costs estimates the wage cost of your roster before payroll runs. It uses the award on each worker's employment contract to calculate gross wages, allowances, super, and on-costs, then compares that cost with the revenue from those shifts.

The optional **Scheduling Costs** feature must be [enabled](#enabling-scheduling-costs). Opening the report also needs Finance access and **Can manage Scheduling Costs**. The Account Owner always has the toggle. For other Admins it is off by default and is turned on from their **Permissions** tab. Managers cannot be given it.

The figures are **estimates** based on your rostered shifts and configured rates, and may differ from what actually gets paid through payroll.

On accounts using the [On-Call Roster](https://docs.astalty.com.au/guide/scheduling/on-call-roster), on-call is not costed: standby allowances, activations, remote work and any shift hours a call moves into overtime are left out of every figure. The [On-Call report](https://docs.astalty.com.au/guide/reports/on-call-report) and the timesheet batch show those.

The supported awards are [SCHADS](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/schads-interpretations-in-astalty), [Nurses](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/nurses-award-interpretations-in-astalty), [Aged Care](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/aged-care-award-interpretations-in-astalty) and [Health Professionals](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/health-professionals-award-interpretations-in-astalty). Each award page lists the implemented rules and the cases that need manual review.

## Check Rates Before Relying on Costs

Costing uses the worker's Astalty base rate and loaded allowance schedules. Xero uses its own mapped pay items and employee template, so a pay group override or an out-of-date rate can make payroll differ from this estimate. See [Maintaining Award Rates](https://docs.astalty.com.au/guide/scheduling/setup/workers/staff-contracted-hours#maintaining-award-rates).

The free-standing date-range cost view does not load adjoining work from the previous pay period. A timesheet-batch interpretation does. Review continuous work at the start of a custom range, missing employees, and manual entitlements described on the award pages before relying on an estimate.

### Temporary Vehicle Rate

For workers whose contract award is SCHADS or Aged Care, Astalty costs eligible vehicle travel at **$1.05/km** from the first full pay period starting on or after **1 September 2026**, for travel through **28 February 2027**. Travel from **1 March 2027** returns to **$1.01/km**, even when the pay period straddles that date. The temporary increase does not apply to earlier-starting pay periods or to Nurses and Health Professionals.

This rate follows the worker's contract award, not a shift's pay group override. Payroll exports send **kilometres**, not the dollar allowance: set the payroll kilometre item to the applicable rate yourself, then change it back when the temporary period ends. A correct cost estimate does not update Xero's pay-item rate.

## Enabling Scheduling Costs

Scheduling Costs is a self-service optional feature. Only the **Account Owner** can turn it on or off, and there are two places to do it:

- **From the Scheduling menu.** Until it's enabled, Account Owners still see **Scheduling Costs** in the Scheduling menu; selecting it opens a page that explains the feature and lets you enable it.
- **From Optional Features.** Go to [Optional Features](https://app.astalty.com.au/settings/optional-features) (Settings > Optional Features) and select **Enable** on the Scheduling Costs card.

Either way you'll land on the Scheduling Costs feature page - select **Enable Scheduling Costs** and confirm.

![The Scheduling Costs feature page describing estimated wage costs, listing its key features and linking to the Scheduling Costs guide, with Back and Enable Scheduling Costs buttons at the bottom.](https://docs.astalty.com.au/assets/scheduling-costs-enable.png)

## Opening the Report

Scheduling Costs lives in the **Process** section of the Scheduling menu, alongside Timesheet Batches.

The report is built from four parts:

- **Filters** - narrow the report by Period (the date range), Site, [Region](https://docs.astalty.com.au/guide/settings/regions) (when Regions are enabled and you can view all Regions), Timesheet Batch, Cost Code (when cost codes are enabled), Activity, Revenue Charge Status, Shift Status, Archived Participants, Deactivated Employees, and Exclude Employees. A **Direct Charges** filter also appears if your organisation uses direct charges. The report defaults to the current week.
- **Summary figures** - cards showing the cost and revenue totals for the filtered period, grouped into **Key figures**, **Cost breakdown**, **Revenue breakdown**, and **Workforce & cancellations**.
- **Daily cost chart** - a day-by-day view of cost and revenue across the period, underneath the summary figures. See [The Daily Cost Chart](#the-daily-cost-chart).
- **Breakdown tabs** - **Cost by Employee**, **Cost by Participant**, and **Cost by Region** tabs, so you can see where the cost and revenue are coming from. See [Breakdown Tabs](#breakdown-tabs).

The **Actions** menu (top right) lets you **Manage Cost Schedule** and **Export as XLSX**.

![The Scheduling Costs report beside the Scheduling menu, with the Period set to 2 - 8 Nov 2026 and the Direct Charges, Archived Participants and Deactivated Employees filters, above the cost schedule chips and the Key figures and Cost breakdown cards.](https://docs.astalty.com.au/assets/scheduling-costs-report-filters-guide.png)

Three filters control who and what is counted:

- **Archived Participants** - the report **excludes** archived Participants by default. Switch this filter to **Include** to bring their supports back into the figures.
- **Deactivated Employees** - the report **includes** deactivated employees by default, so a report you ran before this filter existed still shows the same figures. Switch to **Exclude** to see what your current team costs. Employees with restricted access still count as current employees.
- **Direct Charges** - controls whether direct charge revenue is counted. It's **included** by default, but is switched off automatically while a Cost Code or Activity filter is active, because direct charges aren't linked to either.

Filters apply to the summary figures, daily cost chart, breakdown tabs and XLSX export, with one exception: **Cost by Region** and the workbook's **Region Detail** sheet ignore the **Region** filter so you can compare regions. They still follow the other report filters.

> **Leaving employees out overstates profit**
>
> Leaving employees out - by switching **Deactivated Employees** to **Exclude**, or by naming them in [Exclude Employees](#excluding-specific-employees) - takes their wage costs out of the report, but the revenue they delivered is still counted. **Net Profit** and **Cost-to-Revenue** show a small amber asterisk whenever that is happening, to flag that profit may be overstated and the cost ratio may understate your true costs. Hover the asterisk for the reason.

> **Uncostable employees**
>
> Employees identified as uncostable are excluded from the estimates until the issue is resolved. A banner lists these employees, and the summary figures flag when this may understate your true costs. Check their employment contract, classification or base rate, allowance rates and pay group.

> **Check rates for every pay period**
>
> When a report spans several pay periods and one contract has neither an explicit base rate nor a usable classification rate, Astalty can cost that period using another period's contract and rate. The employee may not appear in the uncostable banner. Check the classification and rate for every covered period, especially when contracts change. Correct missing rate details and rerun the report before relying on the estimate.

### Excluding Specific Employees

**Exclude Employees** leaves named staff out of the cost figures without deactivating them - useful for office staff, trainees, or anyone whose shifts the report was never meant to measure.

The filter isn't on the bar by default. Select the filter button at the end of the filter bar, choose **Exclude Employees**, then tick one or more names. The list covers every employee who has ever been rostered a shift, with **Deactivated**, **Restricted** or **Invited** shown against the name.

![The Scheduling Costs filter bar with an arrow to the highlighted Exclude Employees filter, set to one employee.](https://docs.astalty.com.au/assets/scheduling-costs-exclude-employees-filter-guide.png)

Excluding an employee takes their hours, wages, allowances, super, on-costs, overtime, and paid cancellation costs out of every figure on the report - the summary cards, the daily cost chart, all three breakdown tabs, and the XLSX export. They drop out of **Cost by Employee** entirely rather than showing as a zero row, their cost comes off each Participant they supported on **Cost by Participant** and each region that work belongs to on **Cost by Region**, and their cancelled supports leave the Cancellations card. Revenue is the exception: the income those shifts earned still counts toward **Total Revenue**, which is what the amber asterisk on **Net Profit** and **Cost-to-Revenue** is flagging.

The **Employees** card shows how many were left out. That count is how many of the employees you ticked actually had shifts matching your current filters, so ticking someone who didn't work in the period changes nothing.

![The Employees card on the Scheduling Costs report showing 19 total, 13 worked and 12 costed, with 1 excluded highlighted, beside the Cancellations card.](https://docs.astalty.com.au/assets/scheduling-costs-employees-excluded-count.png)

> **It's a report filter, not a setting on the employee**
>
> Exclusions only affect the report in front of you. Nothing changes on the staff member, nobody else's report is affected, and the filter clears each time you open the report - re-apply it whenever you want the same view.

> **The XLSX export doesn't record who was excluded**
>
> **Actions > Export as XLSX** applies your exclusions, but the workbook carries no column or note saying anyone was left out. Say so yourself when you share the file.

## Understanding the Figures

The summary figures are grouped into four sections - **Key figures**, **Cost breakdown**, **Revenue breakdown**, and **Workforce & cancellations** - with the numbers you're most likely to want pinned at the top. Each card has a hover tooltip explaining how it's calculated. Cards only appear when they're relevant - for example, Fixed Costs only shows once you've added a fixed-amount cost item, and the whole **Revenue breakdown** section is hidden when there's no revenue in the period.

### Key Figures

- **Total Revenue** - all scheduled Charge Items for Participants in the period, based on their service agreements.
- **Total Cost** - gross wages, allowances, super, on-costs, fixed costs, and paid cancellation costs for every costed employee in the period.
- **Net Profit** - total revenue and additional revenue minus total cost. Positive figures show as green (profit) and negative figures as red (a loss).
- **Gross Wages** - base wages from each employee's hourly rate and hours worked, including penalty rate loadings.

### Cost Breakdown

What sits behind **Total Cost**, plus the hourly and overtime figures for the period:

- **Allowances** - award allowances such as vehicle kilometre, first aid, broken shift, sleepover, and laundry.
- **Super Estimate** - estimated superannuation based on gross wages and the current statutory super rate.
- **Payroll On-costs** - percentage-based cost items (e.g. payroll tax, workers' comp) applied to wages, as set in your cost schedule.
- **Fixed Costs** - fixed-amount cost items (e.g. rent, insurance) normalised to the reporting period.
- **Cost per Hour** - average cost per hour worked (excluding paid cancellation costs).
- **Overtime Hours** - total hours across the filtered period that attract an overtime rate. Your award decides which hours those are - most commonly hours beyond an employee's ordinary hours cap, but other rules apply too. This card only appears when there is overtime in the period. See [Seeing Total Overtime Hours](#seeing-total-overtime-hours).

### Revenue Breakdown

- **Additional Revenue** - revenue-coded cost items (e.g. Participant rent contributions) normalised to the reporting period, from your cost schedule or a site. See [Tracking Additional Revenue](#tracking-additional-revenue) below.
- **Direct Charge Revenue** - [direct charges](https://docs.astalty.com.au/guide/finance/direct-charges) billed to Participants in the period that aren't linked to a scheduled support. This includes projected upcoming recurring direct charges that haven't been created yet, so the figure reflects the revenue you expect for the period. It counts toward Net Profit and Cost-to-Revenue, and only appears when there are direct charges in the period.
- **Cost-to-Revenue** - total cost (including cancellations) as a percentage of total revenue plus any additional revenue. Lower is better; under 100% means revenue exceeds cost.

### Workforce & Cancellations

- **Employees** - how many active rosterable employees you have, how many had shifts, how many could be costed, and how many the [Exclude Employees](#excluding-specific-employees) filter left out.
- **Cancellations** - cancelled supports in the period, broken down by whether the Participant is still charged (chargeable / non-chargeable) and whether the employee is still paid (payable / non-payable). This card only appears when there are cancellations in the period.

Three figures on the Cancellations card highlight the financial impact:

- **Paid Cancellation Cost** - estimated wages, super, and on-costs paid to workers for cancelled shifts they're still entitled to be paid for. This is money paid out regardless of whether the Participant was charged.
- **Lost Revenue** - the estimated revenue that would have been billed for cancelled supports marked **not chargeable** - income the organisation can no longer claim.
- **Net Loss** - the pay cost for cancelled supports that are **not chargeable but still payable** - wages paid out with no revenue earned, for example a rostering error under the award.

Select the **Paid Cancellation Cost** figure to open **Cancellations in this period** - a list of every cancelled service behind the total. Each row shows the Participant, the date and time, the hours, the cancellation reason, and its charge and pay treatment, along with the paid cancellation cost and any lost revenue. Select **View** on a row to open the related support.

![The Workforce & cancellations section of the Scheduling Costs report, with an arrow pointing to the $1,058.73 paid cancellation cost in the Cancellations card, above the lost revenue and net loss figures and the daily cost chart.](https://docs.astalty.com.au/assets/scheduling-costs-paid-cancellation-cost.png)

![The Cancellations in this period drawer listing four cancelled supports, each with the Participant, date, time, hours, cancellation reason, charged and paid status, paid cancellation cost, any lost revenue, and a View button.](https://docs.astalty.com.au/assets/scheduling-costs-cancellations-drawer.png)

> **Where cancellation treatment comes from**
>
> Whether a cancelled support is chargeable and/or payable is set when you cancel it. See [Support Cancellations](https://docs.astalty.com.au/guide/scheduling/support-cancellations) for how the Charge & Pay, No Charge but Pay, and No Charge & No Payment options work.

## The Daily Cost Chart

Underneath the summary, a chart plots the period day by day. Each day's bar stacks the cost that day - **Wages**, **Allowances**, **Super**, **On-costs**, **Fixed Costs**, and **Paid Cancellations** - with bands appearing only where there's a figure for them. Revenue is drawn over the top as a line; use the two icons above the chart to switch it between a line overlay and its own bar alongside the cost stack.

Hover a day to see its full breakdown: each cost component, the day's **Total Cost**, its **Revenue** (with **Direct Charges** listed separately where you have them), and the **Net** figure for the day in green or red.

## Breakdown Tabs

Below the summary and the daily chart, three tabs show where the cost and revenue are coming from. They follow the filters at the top, except that **Cost by Region** ignores the **Region** filter. Astalty remembers whichever tab you last had open.

### Cost by Employee

One row per employee, with these columns:

| Column                                                        | What it shows                                                                                                                           |
| ------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------- |
| **Employee**                                                  | The employee's name.                                                                                                                    |
| **Basis**                                                     | Full Time, Part Time, or Casual.                                                                                                        |
| **Base Rate**                                                 | Their hourly base rate. If the rate changed during the period, this shows a range - hover it to see each rate and the dates it applied. |
| **Hours**                                                     | Total hours rostered in the period.                                                                                                     |
| **Overtime**                                                  | Of those hours, how many attract overtime rates.                                                                                        |
| **Contracted**                                                | Their contracted weekly hours, pro-rated across the reporting period.                                                                   |
| **+/-**                                                       | Rostered hours minus contracted hours - green when they're over their contracted hours, red when they're under.                         |
| **Wages**, **Allowances**, **Super**, **On-costs**, **Total** | The cost breakdown for that employee.                                                                                                   |

Every column is sortable. You can also search by employee name and filter by **Basis**.

> **Casual employees have no contracted hours**
>
> **Contracted** and **+/-** show a dash for casual employees, because casuals have no contracted weekly hours to compare against. Their **Hours** and **Overtime** figures still appear as normal.

### Seeing Total Overtime Hours

Overtime here means any hours paid at an overtime rate under the award on the worker's employment contract. That's most often hours past their ordinary hours cap, but rules like active sleepover work and broken-shift spans count too. For the exact triggers, see the award rules for [SCHADS](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/schads-interpretations-in-astalty#ordinary-hours-and-overtime), [Nurses](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/nurses-award-interpretations-in-astalty), [Aged Care](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/aged-care-award-interpretations-in-astalty) and [Health Professionals](https://docs.astalty.com.au/guide/scheduling/scheduling-faq/health-professionals-award-interpretations-in-astalty).

There are three places to read overtime out of this report, depending on how much detail you need:

- **Total for the period** - the **Overtime Hours** summary card at the top of the report.
- **Per employee, plus a total** - the **Overtime** column on the Cost by Employee tab. A **Totals** row at the bottom of the table adds up Hours, Overtime, Contracted, +/- and every cost column.
- **Per rate** - expand an employee's row to see how their hours split across each pay rate, including the individual overtime bands.

![The Cost by Employee tab of the Scheduling Costs report, marked with an arrow and sorted by overtime, with the Overtime column highlighted showing overtime hours for each employee alongside their Hours, Contracted and +/- figures.](https://docs.astalty.com.au/assets/scheduling-costs-overtime-column-guide.png)

> **The Totals row covers every filtered employee**
>
> The **Totals** row reflects everyone matching your current filters and search - not just the employees visible on the page you're looking at. Narrowing the Basis filter to **Full Time**, for example, gives you total full-time overtime for the period.

### Per-Employee Rate Breakdown

Select the chevron at the start of an employee's row to expand it. The expanded row shows a **Wage** table with one line per pay rate - the base rate, the multiplier applied, the hours at that rate, and the resulting cost - with a total underneath. This is where you can see how many hours landed in each overtime band rather than just the overall overtime figure.

If the employee has allowances in the period, an **Allowance** table appears alongside it showing each allowance, the units, and the cost.

### Cost by Participant

This tab flips the view around to show cost and profitability per Participant: **Hours**, **Wages**, **Allowances**, **Super**, **On-costs**, **Cancellation**, **Total Cost**, **Revenue**, **Net Profit**, and **Margin**. A **Direct Charges** column also appears when your organisation uses direct charges. Rows expand here too, and every column is sortable.

### Cost by Region

Use **Cost by Region** to compare roster cost and revenue across the [Regions](https://docs.astalty.com.au/guide/settings/regions) assigned to your workers, sites, and Participants. Each row shows:

- **Region**
- **Hours**
- **Gross Wages**
- **Total Cost**
- **Revenue**
- **Net Profit**
- **Cost-to-Revenue**

Search by region name or sort any column. These rows follow all report filters except **Region**. Selecting a Region narrows the summary, daily chart, **Cost by Employee** and **Cost by Participant**, while **Cost by Region** keeps the other regions for comparison.

> **Region rows do not add up to the report totals**
>
> Regions can overlap. A worker, site, or Participant may belong to more than one region, so the same work can contribute to several rows. Region rows also exclude paid cancellation cost. Use the summary figures at the top of the report for organisation-wide totals.

### Exporting the Figures

**Actions > Export as XLSX** produces a workbook with a summary, employee breakdown, Participant breakdown, region breakdown, daily breakdown, and a list of any uncostable employees. The summary sheet carries the period's **Overtime Hours**, and the employee sheet carries the same **Hours** and **Overtime** columns as the on-screen table, so you can total or pivot them yourself.

The **Region Detail** sheet follows the **Cost by Region** tab: it keeps every region after the other filters are applied, even when a **Region** filter is selected.

## The Cost Schedule

The cost schedule is where you define recurring cost and revenue items that fold into the estimates for your whole organisation. Open it from **Actions > Manage Cost Schedule**. Configured items also appear as chips at the top of the report - revenue in green and expenses in red.

![The Cost Schedule list with an Add Cost Item button, showing each item's Name, Direction, Value and Type: a monthly revenue item, a monthly expense and two % of payroll expenses.](https://docs.astalty.com.au/assets/scheduling-costs-cost-schedule-list.png)

### Adding a Cost Item

Click **Add Cost Item** and complete the form:

- **Name** - a label for the item.
- **Direction** - choose **Expense** (a recurring business cost, e.g. payroll tax, insurance, or software) or **Revenue** (recurring income added to scheduling profitability).
- **Type** - **% of Payroll** or **Fixed Amount**. Revenue items must use a fixed amount.
- **Value** - the rate (for a percentage) or dollar amount (for a fixed amount).
- **Frequency** - for fixed amounts, how often the amount applies (Weekly, Fortnightly, Monthly, Quarterly, or Annual). Fixed amounts are normalised to the reporting period.

![The Create Cost Item drawer with Expense selected as the Direction and Type set to % of Payroll, showing the Rate (%), Wage Base, Annual Threshold ($) and Allowances fields.](https://docs.astalty.com.au/assets/scheduling-costs-create-cost-item.png)

Percentage-of-payroll items have three extra options:

- **Wage Base** - apply the percentage to **All Wages** (base pay plus overtime) or **Ordinary Wages Only** (standard, non-overtime hours).
- **Annual Threshold** - only wages above the pro-rated threshold contribute to the cost. For example, a $1,000,000 annual threshold means roughly $38,356 per fortnight is exempt. Useful for tiered costs like payroll tax.
- **Allowances** - control whether allowance costs (first aid, sleepover, broken shift, etc.) are added to the wage base for this item.

## Tracking Additional Revenue

Beyond the revenue Astalty already calculates from Participant charges, you can record recurring income so the report reflects a true profit rather than just costs. Revenue items show in green with a **+** and feed into **Additional Revenue**, **Net Profit**, and the **Cost-to-Revenue** ratio.

There are two places to add revenue:

- **Provider-wide** - add a **Revenue** cost item in the [cost schedule](#the-cost-schedule) for income that isn't tied to a single site.
- **On a SIL house** - record income against a specific site (e.g. Participant rent contributions) so the report shows that house's real profit, not just its expenses.

### Adding Revenue on a SIL House

Site cost items live on the site's **Cost Items** tab:

- Open the SIL house site and go to the **Cost Items** tab.
- Click **Add Cost Item**.
- Set the **Direction** to **Revenue** (recurring income for this site, e.g. Participant rent contributions) or **Expense** (a recurring cost for the site, e.g. rent, power, or internet).
- Enter the **Amount** and a **Frequency** (Weekly, Fortnightly, Monthly, Quarterly, or Annual).

Site cost items are always fixed amounts. When you filter the Scheduling Costs report to that site, its items appear as chips alongside the provider-wide cost schedule and are included in the totals.

## Video walkthrough

Video walkthrough: Scheduling Costs walkthrough.
